facade aluminium composite panel test
Three circle areas with diameter of 25 mm are selected on the surface of each specimen as the testpositions. The coating thickness shall be measured at least 3 times on each position in accordancewith GB/T 4957,and the mean value is taken as the coating thickness of the area.
The specimen is set up as above,and the center of a circle area selected is right under the conduit.
Granules are continuously added into the funnel. The falling granules abrade the surface coating con-tinuously until its coating is worn out exposing aluminium sheet of about 4mm-diameter spot. Andthe total granule volume is recorded. Repeat the test on the rest of circles. The distance between a-bove circles shall be kept far enough to avoid any interruption.

Hot Tags: facade aluminium composite panel, China facade aluminium composite panel manufacturers, suppliers, factory, aluminum composite plate, aluminum composite roof, Anodized Aluminum Composite Panel, composite panel sheet, FEVE Aluminum Composite Panel, Signage Aluminum Composite Panel
