Process Aluminum Composite Panel

Cutting

It can be cut into all kinds of shape by using water jet, contur milling machine.forming saw and curve saw.

Drilling

Panel can be drilled by twist drill, which is usually used for drilling aluminum and plastic.

Shearing

The shearing can be done by shearing machine. When shearing, please make sure there is a gasket under the blanking tools.

Riveting

The riveting can be done by simple tools,rivet or blind rivet. When using it for outside, please take the heat expanding into your consideration.

Hole Punching

General eyelet machine can punch holes on panels with any thickness, When cutting, please use steady installation tools and make sure there is a narrowest gap.

Cut Thread

Using general eguttulate wood, metals heet and metal screw. When using it for outside, please take the heat expanding into your consideration.

Bending

Bending can be done by folding table or brake press. The bend inside diameter is about 10 times thicker than the panel thickness.

Welding

The panel can apply to heat air welding.Use heat air weld facility to heat and weld plastic core and plastic welding rod.

Adhesive

With the help of adhesive force produced on the surface of the aluminum composite panel, ACP is firmly connected to the wall.

Clamp

Applying the clamping force on the aluminum plate, to prevent it from moving.

Paint

Through the gun with the help of air pressure,disperse into uniform and fine droplets,applying to be a method of surface coating.

Dig+Hem

For the require hem treatment of aluminum composite panel edge, so as to achieve the specific performance.