1 2 aluminum honeycomb panels JOINTING / FIXING TECHNIQUE
GENERAL
1 2 aluminum honeycomb panels can be joined by means of standard processes used in metaland plastics technology. If 1 2 aluminum honeycomb panels is to be joined to structural partsof metals other than aluminium, or if fasteners (e.g. bolts, screws) are tobe used, the following material guidelines should be observed:
Fasteners and structural parts made of aluminium, plastic or stainlesssteel should be suitable for assembly with 1 2 aluminum honeycomb panels When using other materials please insert insulating washers or apply protective a coating to prevent corrosion.
Please take the thermal expansion of the panel into account for outdooruse of 1 2 aluminum honeycomb panels to avoid jamming or deformation.
The minimum gap depends on the expected expansion of the panel.
Please refer to processing recommendations for rivets and bolts for additional measures to prevent jamming.
The linear thermal expansion of 1 2 aluminum honeycomb panels is determined by thealuminium cover sheets.
At a temperature difference of 100°C the longitudinal deformationis 2.4 mm/m length/width.

Hot Tags: 1 2 aluminum honeycomb panels, China 1 2 aluminum honeycomb panels manufacturers, suppliers, factory, acm panels, acp wall panel, aluminum cladding panels, aluminum composite acm, aluminum plastic composite, honeycomb aluminum sheet
