Name: China Aluminum Honeycomb Core Panels Manufacturers Suppliers Factory - Aluloyal
Brand: Aluloyal
SKU: 310139690

Aluminum Honeycomb Core Panels

Aluminum Honeycomb Core Panels suppliers

Aluminum Honeycomb Core Panels factory

Aluminum Honeycomb Core Panels best

Aluminum Honeycomb Core Panels high quality

Aluminum Honeycomb Core Panels price

Aluminum Honeycomb Core Panels suppliers

Aluminum Honeycomb Core Panels factory

Product Introduction:

Aluloyal present aluminium honeycomb panels that are comprised of a honeycomb board as core, and a thin aluminium sheet as the outer layer. The panels are robust and have a hexagonal design in the core, inspired by a natural honeycomb structure. Its innovative design makes the panel lighter and enhances its stability and stiffness. Honeycomb boards are a new take on aluminium composite panels, where the removal of thermoplastic core plays a key role in its features and characteristics.

Send Inquiry

Description

Technical Parameters

aluminum honeycomb core panels EDGING

PRODUCING EDGINGS BY FOLDING THE COVER SHEET
Routing the panel by means of a special saw blade
Carbide tipped saw blade, tooth geometry, trapeze tooth (customized
design by aluloyal)
Bore diameter: d=30mm

Saw blade diameter:D= 244 + 0.05 mm

Number of teeth:Z =40

Tooth thickness:Z =40
Clearance angle:=15°
Rake angle: =10°positive

Width of base c=3.2mmutter
at trapeze tooth:=2mm

Depending on the saw blade diameter and the panel thickness, a cor-responding tracing roller, as with the routing and folding technique for aluminum honeycomb core panels , is required to keep the precise routing depth (remainingsheet thickness 0.8 mm). After routing the panel, the honeycomb coreand the rear cover sheet are cut off using a joint cutter.

Routing the panel with a cutter disk for rectangular grooves

A further possibility for preparing the panel edging for cover sheetfolding is routing using a cutter disk for rectangular grooves. For panelthicknesses of 15, 20 and 25 mm a pre-cutter or a joint cutter is used toremove the remaining core.

Folding the edges of the cover sheets

We recommend folding the edges of the cover sheets with a foldingmachine as better results are obtained using this method.

Hot Tags: aluminum honeycomb core panels, China aluminum honeycomb core panels manufacturers, suppliers, factory, alu honeycomb, aluminum honeycomb panel, Porcelain Honeycomb Panel, SPC Aluminum Honeycomb Panel, Stainless Steel Honeycomb Panels, Stone Aluminum Honeycomb Panel